Stores Water Under Pressure
Supplies water between pump cycles so the pump does not need to start every time a fixture is used.
Pulsing water, frequent pump starts or water around your pressure tank are reasons to have the system checked. They may point to a tank problem, but the cause could also be a connection, control or another part of the water-supply system.
Contact John The Plumber about well pressure-tank repair, replacement and installation in Ottawa. Tell us what has changed and whether your home still has water.
The pressure tank holds water under pressure and supplies some of the water your home uses between pump cycles. In common pre-charged designs, a diaphragm or bladder separates the water from compressed air.
As water is used, system pressure drops and the pump starts at the control setting. The amount of water available between cycles is called drawdown. Tank selection and setup need to suit the pump and control arrangement.
Supplies water between pump cycles so the pump does not need to start every time a fixture is used.
Provides a usable amount of water between pump cycles, depending on the tank and system setup.
Tank selection and setup need to suit the pump, pressure controls and household water use.
Important: Tank selection and setup need to match the pump and control arrangement. The available drawdown is not the same as the tank's total stated volume.
Changes in water pressure, pump operation or the condition of your equipment can be reasons to arrange an assessment. These symptoms do not always mean the pressure tank itself has failed.
The pump starts repeatedly during ordinary water use.
Water pressure fluctuates more than it used to.
There is visible corrosion or water around the tank or nearby fittings.
You notice a change in the system after a repair or equipment replacement.
Avoid moving the tank or adjusting its air charge to investigate. Pressurised equipment needs assessment using the correct procedure for its model and condition.
Water on the floor does not prove the tank body is leaking. A nearby fitting, valve or pipe connection may be the source. Identifying the leak matters because repairing a connection and replacing a tank are different jobs.
If the tank itself has failed, the options depend on its construction, condition and manufacturer guidance. Some issues require a replacement tank; others may involve serviceable parts or related plumbing. Do not assume every bladder or diaphragm can be repaired.
Diagnosis comes first. The right next step depends on where the problem is coming from and the condition of the existing equipment.
Water around the tank may be coming from a fitting, valve or connected pipe rather than the tank body.
Depending on the findings, the work may involve related plumbing or serviceable components instead of replacing the entire tank.
If the tank itself has failed, replacement may be necessary depending on its design and manufacturer guidance.
The replacement tank should suit the existing pump, pressure controls and installation conditions.
A new or replacement tank needs to work with the pump, pressure controls and available space. Its nominal tank volume is different from the amount of water it supplies between pump cycles.
Discuss the existing equipment, household water use, access and any changes to the system before selecting a tank. The installation scope should also identify any related fittings or controls being replaced and how the completed system will be checked.
The tank's total capacity is not the amount of water available between pump starts. Actual drawdown depends on the tank design and operating pressure settings.
Two different measurements that matter when selecting a pressure tank.
The overall capacity of the tank, including the space occupied by air.
The water delivered as pressure falls between pump cycles.
Simplified conceptual illustration. Water levels and proportions are not intended to represent a specific tank model or pressure setting.
Tank selection needs to account for the existing pump and pressure controls. The components must work together as part of the water-supply system.
Discuss the household's current water needs and any changes since the original equipment was installed before selecting a replacement tank.
Confirm available space, access, connected fittings and controls, and how the completed system will be checked.
Before choosing a tank: Review the existing equipment and project requirements. Tank volume alone does not determine whether a replacement is suitable for your system.
Take a look at photographs of pressure tank work and a project video from John The Plumber. Every well system is different, so the equipment and work required will depend on the home.
A look at pressure tank replacement work from John The Plumber.
Watch our Carleton Place project video featuring pressure-tank replacement alongside water-softener and drain-line work.
This is one example of related plumbing work, not a suggestion that every home requires the same upgrades.
These photographs and video illustrate selected pressure tank projects. The appropriate repair or replacement work depends on the equipment, its condition and the needs of the property.
Homeowners in Ottawa and surrounding communities can contact John The Plumber for help with well pressure tanks, including repair, replacement and installation. Tell us what has changed with your water supply so we can discuss service for your system.
Request Pressure Tank ServicePrefer to call? 613-227-7465
Ask about pressure tank service and related well-system equipment at your property.
Discuss whether the issue may involve the tank itself, its connections or related plumbing.
Tank selection and installation need to account for the pump, controls and existing setup.
Contact the Ottawa team about your location, equipment and appointment availability.
Contact John The Plumber about well pressure tank repair, replacement and installation in Ottawa and surrounding communities. Tell us where you're located so we can confirm service availability for your system.
Pulsing water, frequent pump starts or a leak around the tank? Tell us what you've noticed, where you're located and whether your home still has water.
Service availability depends on your location, equipment and the work required.
Have questions about well pressure tanks? Here are answers to some common questions about water pressure, equipment and replacement.
No. It may help when the tank is the cause, but low pressure can have other sources. If the problem affects only one fixture, the issue may be elsewhere in the plumbing.
Not automatically. The pump and controls should be considered with the tank, but replacement depends on their condition and suitability. Our well-pump repair page covers pump-related symptoms.
No. These tanks serve different purposes. Identify the equipment and system before choosing a replacement.
The tank selected, access, removal and the condition of connected plumbing all affect the scope. Ask whether fittings, controls, disposal and any other required work are included in the estimate.
Contact John The Plumber with your Ottawa location, the symptoms and any equipment details you already have. Ask about service for your system and appointment availability.
Service availability depends on your location, equipment and the work required.
