A Sump Pump Clog & Other Reasons You Need It Repaired
John THE Plumber Kingston has repaired sump pumps a thousand times over for both home and commercial structures. It’s our business to keep you nice and dry! Our Company are huge fans of sharing any knowledge with you that we can, and we want to tell you a little bit about sump pumps. If you notice it isn’t operating as it used to, don’t despair right away. It’s possible that it needs to be replaced, but often times it simply needs a repair due to a sump pump clog somewhere within the machine. To help you better assess whether it’s a replacement or a repair needed, we have taken the time to list the top three reasons a sump pump can become clogged, and what to watch for.
Sump Pump Clog: The Perimeter Drain
Many sump pump systems come with a drainage system around its perimeter, hence the name perimeter drain. What it does is catch all the excess water so it doesn’t pool onto your basement floor and begin a flood but take care. If it can catch the water, it will catch the debris as well; if too much sediment builds up in that drain well, your system will develop a clog.
Sump Pump Clog: The Mud Zone
Underneath your basement floor is another place a drainage system can be built; you’ll notice it’s installed right into the mud, again hence the name “mud zone”. Albeit it can do its job effectively, it cannot escape dirt and water. Mud that is created can mud leak into your drainage system and after a period of time can clog up your sump pump system. If this is the type of drainage system you have you need to keep an extra eye; if this situation gets out of control the only way to fix it is to jackhammer open your floor to fix the clog – it’s messy and expensive so do be cautious!
The Float Switch Has Broken
Your sump pump makes its decisions/does all of its thinking through what is called a float switch. When the switch has floated up to a certain level due to excess water it will turn itself on, and off into a dormant state when it floats back down. If higher amounts of debris should collect, the switch can become stuck in one position and doesn’t know it should be thinking differently. The solution to this is to keep an eye and give it a clean once in a while; it will save your switch and ultimately your basement!
If you experiencing a sump pump clog or are wondering what kind of shape it is in, give us a call today! We’ll send one of licensed Kingston plumbers to come take a peek and see where you are at – it could save you loads in the long run, not to mention the headache!
Call John THE Plumber Kingston TODAY – You’ll Be Glad You Did!